About; Zone And Controller Id; Factory Initialization - Russound UNO-TS2 Instruction Manual

Several installer-level functions are accessible
from the Installers Setup screen.
About - This screen shows the current firmware
and screen versions on this touchscreen.
Zone and Controller ID - On this screen, enter
the touchscreen's zone number the UNO-TS2 is
About this keypad
Firmware Version: X.XX
Screens Version: X.XX.XX
This screen is shown when "About"
is selected
Factory Init - This screen allows a factory initialization to be performed on the touchscreen.
This sets the unit back to its factory settings.
Factory Init
Are you sure?
This will Factory Init the touch-screen only
This screen is shown when "Factory
Init" is selected
INSTALLER GUIDE
Other Installer Setup Functions
controlling and the ID number of the controller to
which it is connected.
Note: The controller must be power cycled after
the Zone Number and/or Controller ID is
changed on the UNO-TS2
Zone and Controller IDs
This screen is shown when "Zone and
Controller ID" is selected
Factory Init
Factory Init complete
This screen is shown when the
Factory Initialization is complete
6
1
23