Controlling The Russound St2 Tuner - Russound UNO-TS2 Instruction Manual

USER GUIDE

Controlling the Russound ST2 Tuner

The ST2 tuner screens on the UNO-TS2 allow you to directly enter a station's frequency or perform a
station seek or scan function from the touchscreen. Bank and preset memory names show in a single
screen view, and you can save a new preset right from the touchscreen. If the UNO-TS2 is powered
on before the ST2 Tuner is turned on, existing preset names may not appear until after the tuner's
boot up procedure is complete (less than a minute).
Numeric Station/Channel Selection
Tuner stations or channels can be directly select-
ed from the numeric entry screen. For satellite
radio channels, enter the channel number (from
1 to 3 digits). For AM/FM, enter the 3- or 4-digit
frequency number. Press the AM or FM button to
conveniently switch between AM and FM from
the touchscreen.
AM/FM Tuner Advanced Features
The AM/FM tuner advanced controls are
accessed from the "3 of 3" screen. Select Local
or Distant reception and stereo or mono signal.
For Seek and Scan functions, press the appropri-
ate button to begin. Press the Stop button to
end. The hard button secondary function lets you
select a frequency by tuning up or down, and
select a preset memory from the current bank
without leaving this screen.
10
Tuner 2
2 of 3
Example of numeric station/channel
selection screen for ST2 Tuner
107.1 MHz FM
Example of AM/FM tuner screen