Jung Smart Visu Server Quick Start Manual page 38

7.3 "Goodbye" action
This action should mute your Sonos devices when leaving the home by pressing a button.
1
2
1. Create the action in the Actions tab.
2. Allocate the action to an area as
necessary and select the type of
action as Event-dependent [1].
3. Select an action trigger here, e. g. the
"Switch Good Bye" push-button and
defi ne the state for triggering the
action:
„At state OFF" [2].
4. The Action trigger is a function that
you create previously under Areas
and Functions. It triggers the action.
3
4
5. Add the functions to the action with
Add function to action. Select all
Sonos groups here that should be
muted. Press the Pause button [3] and
set the Volume to 0 percent [4].
SMART VISU SERVER + SONOS 19
5
6. Under Actions [5] in SV Home, activate
the action using  .