Honda BF2.3D Easy Setup page 2

7
Unscrew the oil fill cap

Honda 10W-30 FC-W (or equivalent)
engine oil, API catagory SG, SH, or
SJ, to the upper limit mark on the
inspection window . Do not overfill.


Inspection Window:
Initial oil fill amount:
Approximately 8 oz.
UPPER LIMIT
LOWER LIMIT
Starting The Engine & Break-in
Refer to the OPERATION section of the
Owner's Manual and follow the
instructions for starting the engine.
The break-in procedure allows the
moving parts to wear in smoothly for best
performance and long service life.
For the first 10 hours, run the outboard
motor at low speed, and avoid full-throttle
operation.
8
Reinstall the motor cover.
and add


Registering Your Outboard Motor
Register your outboard motor to
receive important service information
and updates.
Visit marine.honda.com and
click on Service & Support, then
Product Registration.

© 2014 American Honda Motor Co., Inc. All Rights Reserved
9
Add fresh Regular grade (pump
octane of 86 or higher) gasoline
containing no more than 10%
ethanol (E10).
Have a question or a problem?
Most questions or concerns can be
answered by reading the Owner's Manual
or contacting the retailer where you
purchased your Honda outboard motor.
Where is a dealer near me?
You can find the closest Authorized
Honda Marine Dealer to you by visiting
marine.honda.com and clicking on
Find A Dealer.
PPD53966B