User Manual 1. Products Overview Tracker is a GPS/ GPRS based tracking device designed for heavy motorbike, intercity bus, school bus and fleet management And support WCDMA 3 G network. It has built-in terminals of GPS module and GSM communication module, which are used for getting the location data and send it to authorized phone number via SMS, and tracking through free maps Google Earth or Google Map;...
User Manual 3. Tracker Characteristics 3G WCAMA SMS /GPRS tracking (support TCP/UDP) External GPS&GSM antenna (optional built in GPS & GSM antenna ) Wide voltage range input 9-90v (for high power and electric motorcycle application ) WiFi positioning (Optional ) ...
User Manual 4. Getting Started This section will describe how to use the tracker. 4.1 Hardware and Accessories GPS antenna GSM antenna external power connecting wire 4.2 Function key and Interfaces The external GSM antenna port The external GPS antenna port Power LED GSM LED GPS LED...
User Manual Orange LED- GPS 0.3s on and 0.3s off GPS module initializing 1s on and 3s off GPS module works well, but GPS position is not fixed 0.1s on and 3s off GPS module works well and GPS position is fixed port The external GSM antenna port Connect the GPS antenna...
Page 7
User Manual 4.4.3 Install GSM antenna and GPS antenna, see pictures below: GPS antenna GSM antenna When installing the antenna, please note that different antennas correspond to different port. 4.4.4 Install external power connecting wire Connect the device One end: black line 、 red line and white line connected to the external power connecting wire Connection...
User Manual 5. Parameter Configuration There are 3 ways to set parameter: set by SMS, set by GPRS. 5.1 Set by SMS Phone Tracker Users can set the parameter of tracker by mobile phone SMS, see <command list> from the <Communication protocol>.
User Manual NO.: authorized number’s serial number, range of: 1~3 Phone Number: authorized number, range of: 0~19 characters A: range of: 0~1; when the parameter ‘A’ is 0, it means disable Geo-fence alarm, otherwise it means enable Geo-fence alarm. Default is 0 B: range of: 0~1;...
User Manual 9. Tracking by GPRS SMS Command: $SMS,000000;W002,APN,Username,Password;W003,IP,Port;W004,ID;W005,X;W009,Y;! Description: enable GPRS tracking function. Explain: 1. APN: access point name of network 2. Username and Password are optional. If you don’t know what they are, please just input APN only 3.
User Manual - 10 11. Set the time zone Set the time zone of SMS SMS command: $SMS,000000;W020,X;! Describe: Choose time zone of SMS, time zone default is GMT 0. Explain: X=time zone value, please plus"-"in front if it is a negative, otherwise, ignore it. Unit is minutes (New York’s time zone is -300minutes) For example: $SMS,000000;W020,480;!
User Manual - 11 14. Low battery alarm and automatically Power on/off When the battery level is lower than 15%, it will send SMS to all authorized numbers or send alarm data to server. Tracker will be off automatically if the power level is 0%; during charging, tracker will automatically switch on when power level is higher than 15%, and send a warning SMS to all authorized number.
Page 13
User Manual - 12 The SIM card has run out of credit Replace or recharge value of the SIM card. Inspect SIM, and clean the contact. If re-inserting does not help, try another SIM card is damaged or warped one. Problem: tracker cannot get the GPS location Possible cause Solution...
Need help?
Do you have a question about the GVT-430 and is the answer not in the manual?
Questions and answers