Connecting To Ac Power; Dhd Controller Rear Panel; Connecting 12-Volt Trigger Outputs - Runco Video Xtreme VX-40d Owner's Operating Manual

AutoScope Lens Motor (Rear)
Power
AC Input
Switch
3.5-mm
mini plug
Retractable Screen or other Serial No
12-Volt trigger-activated
Runco International
Union City, CA
device
Model
OUTPUTS
R/Pr G/Y B/Pb
Video Processor / Controller
H V H/V DVI Out
Figure 3-14. Connecting 12-Volt Trigger Outputs
The VX-40d/-50d/-60d/-80d system includes two (2) AC power cords (one each for the
DHD Controller and projector).
DHD Controller: Plug the female end of one power cord into the AC receptacle on the
rear of the DHD Controller. Connect the other end to your AC power source
(100 to 240 VAC).
Projector: Similarly connect the VX-40d/-50d/-60d/-80d to a nearby AC outlet. The input
voltage to a VX-40d or VX-60d must be between 100 and 240 VAC. The input voltage to
a VX-50d or VX-80d must be between 200 and 240 VAC.
The LED status window displays an active pattern of segments to
indicate the projector is changing its state from powered down to
powered up. "--" appears in the display when the projector is
ready to be turned on.
AutoScope Lens Motor: With AutoScope-equipped projectors, a third power cord is
provided for the lens motor. Plug the female end of the AC power cord into the AC
receptacle on the rear of the lens motor assembly. Connect the other end to a 110 VAC
power source.
The input voltage to the AutoScope lens motor must be between
Caution
100 and 120 VAC. Do not connect the AutoScope lens motor
to a 200-240 VAC power source!
Runco VX-40d/-50d/-60d/-80d Owner's Operating Manual
INPUTS
R/Pr G/Y B/Pb H V
HD1
HD2
R/Pr G/Y B/Pb H V
SDI
Pb Pr
DVI 1 DVI 2 Option Component Video
DHD Controller
Rear Panel
SYSTEM CONTROL INTERFACE
RISK OF ELECTRIC SHOCK
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
TRIGGERS
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE CENTER.
1 2 3 IR
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
Y S-Video 1
100-230VAC 50-60 Hz, 165 Watts Max
Video S-Video 2 RS-232 Out RS-232 Control
35
CAUTION !
DO NOT OPEN
Made In USA

Connecting to AC Power

Installation