Manual Override Operation - Pride Backpacker AVP 2.0 Owner's Manual

Rf wireless pendant, backpacker series
Table of Contents

Advertisement

Available languages

Available languages

NOTE: Ensure that the SUV or van has enough
headroom to accommodate the height of the
mobility device before loading it into the vehicle.
Lower the tiller, adjust the seat back angle, or
remove the seat if necessary. Refer to the mobility
device owner's manual for more information on
these adjustments.
WARNING! Do not exceed the load limits
of your vehicle as specified by the vehicle
manufacturer.
WARNING! Do not sit on your mobility device
while it is in a moving vehicle.
When you are ready to remove the mobility device from
the vehicle, lower the platform to the ground, unfasten
the Y-strap, and drive the mobility device off of the
platform. Once unloading is complete, return the lift
platform into the vehicle.

MANUAL OVERRIDE OPERATION

The lift is equipped with a manual override feature
that, in the event of a power failure, allows the lift to
be manually positioned. Using the supplied tools, it is
possible to elevate or lower the platform (Backpacker
AVP only), raise or lower the tower arm, and move the
lift forward or backward.
NOTE: The tools needed for manual operation are
included with the lift system. (Drill not included.)
The Backpacker lift platform can be raised/lowered
from the adjustment point located at the top of the lift
(see figure 11).
NOTE: Some lifts have only a single adjustment
opening on the motor. See figure 12.
PROHIBITED! DO NOT use the flex-shaft when
manually raising or lowering the lift platform
while using the method illustrated in figure 11.
Attach the needed hardware directly to the
drill.
PROHIBITED! Never manually move the lift
backward with the lift platform in the lowered
position. Ensure the lift platform is fully raised
and the tower arm is completely retracted. See
figure 14.
16
I V. O P E R AT I O N
www.pridemobility.com
CAPS
Figure 11. Raise or Lower the Platform. DO NOT
use the
Flex-Shaft for this Operation
Figure 12. Raise or Lower the Platform (Single
Adjustment Opening)
HARDWARE
LIFT PLATFORM
Backpacker Series

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Backpacker plus

Table of Contents