Map Your Device In Mouse Mode - Wacom CTL-6100WL User Manual

Map your device in mouse mode

Mouse
In mode, you use the pen like a mouse. The cursor stays on the point that you left it when you pick up your pen, and you
interact with your device like you interact with a mousepad or trackpad.
1. In Wacom Tablet Properties, select your
2. From Mode , select Mouse
3. If desired, change the mouse settings.
Tip
: The best way to decide how to adjust these settings is by moving the sliders and testing how they affect your screen
Mouse Acceleration
cursor movement.
they work together.
Mouse Height
cursor across the screen.
Mouse Acceleration
moving across the device.
Mouse Speed
CAUTION : When you make changes to these settings, you are not changing corresponding settings in your computer's
system settings. However, if you make changes to mouse settings in your computer's system settings, those changes may affect
Mouse
how your mouse works in
pen from the
.
Mouse Speed
and
: Move the slider to adjust how high you have to lift up off the tablet in order to continue moving the
: Move the slider to adjust how far the screen cursor moves based on how quickly you are
: Move the slider to adjust how far the screen cursor moves as you move across the device.
mode.
Tool list, and then select the
affect each other, so be sure to move them both to see how
User's Manual
Mapping tab.
50
50