Picture Adjust (Advanced) - Runco Video Xtreme VX-2000d Operating Manual

1080p digital light processing projector and digital high definition (dhd) controller

Hide thumbs Also See for RUNCO Video Xtreme VX-2000d:

Brochure (6 pages)

Table Of Contents

Table of Contents

To access advanced picture quality settings, select Advanced from the Picture Adjust

menu. This sub-menu presents the following options:

ICC Adjust: Select ICC Adjust from the Advanced Picture Adjust menu to customize the

displayed color space. The adjustments you make here are stored in the

currently-selected "Picture Memory" preset.

For each of the six primary colors – red, yellow, green, cyan, blue and magenta – you can

adjust the following:

• Hue: These slidebars adjust the red/green color hue for true color reproduction of

video signals. For best results, adjust the hue while displaying an external color bar test

pattern (Figure 4-4).

Changing the hue of a primary color affects the gamut (range) of possible colors. For

example, changing the value for red moves the color closer to either yellow or magenta,

which in turn affects all displayed colors having a red component.

Table 4-3 describes the effects of adjusting the primary color hues.

Table 4-3. Effects of Primary Color Hue Adjustments

Primary Color

Red

Yellow

Green

Cyan

Blue

Magenta

• Saturation: This slidebar adjusts the color saturation level – the amount of that color in

a video image. Lower settings produce less saturated colors; a setting of "-30"

removes that color from the image entirely. If the saturation is too high, that color will be

overpowering and unrealistic.

• Intensity: This slidebar adjusts the intensity – also known as luminance – of a given

color.

• Default: To reset ALL ICC settings – Hue, Saturation AND Intensity of all six colors –

for the currently-selected "Picture Memory" preset to their factory-default values, select

Default (directly below the "Intensity" menu item) from the ICC Adjust menu. Then,

select Yes to confirm the reset.

To reset only the Hue, Saturation OR Intensity of all six colors for the currently-selected

"Picture Memory" preset to their factory-default values, select Hue, Saturation or

Intensity from the ICC Adjust menu and press ENTER. Then, select Default (the last

menu item) from the ICC Adjust menu. Then, select Yes to confirm the reset.

Brilliant Color™: Select Brilliant Color™ from the Advanced Picture Adjust menu to

change the BrilliantColor setting. BrilliantColor utilizes a new color-processing algorithm

and system level enhancements to enable higher picture brightness while providing truer,

more vibrant colors. To enable BrilliantColor, set it to On; to disable it, set it to Off.

Runco VX-2000d Owner's Operating Manual

Press

to move the color...

Closer to magenta

Closer to red

Closer to yellow

Closer to green

Closer to cyan

Closer to blue