Yamaha FZS1000 2003 Supplementary Service Manual page 17

U Route the sidestand switch lead oil level switch lead
outside the hose.
V To the cylinder #4.
W Route the carburetor heater hose through outside
of the coolant pipe.
X Route the starter cable through outside of the cool-
ant hose and upward of the carburetor heater hose.
Y Tail/ brake light and right turn signal light lead
should not be stick out from the gap between the
rear fender and tail / brake light.
Z Route the turn signal light lead through hole on the
rear fender.
AA Push in the coupler of tail / brake light leads be-
tween the rear fender and frame.
BB Push in the wire harness between ribs.
CABLE ROUTING
CC Route the spark plug leads #2, 3 between EXUP
cable and spark plug lead #4.
DD Route the throttle cables 1 and 2 between right
coolant hose and left coolant hose, and upward of
the EXUP cable.
EE Route the spark plug lead #4 forward of the cool-
ant hose and downward of the EXUP cable.
–9–
SPEC