Axis Q1615–E Mk II User Manual page 12

AXIS Q1615–E Mk II Network Camera
Setup
How to handle scenes with strong backlight
To make both dark and bright areas of the image visible, turn on WDR.
1. Go to Settings > Image.
2. Turn on WDR under Wide dynamic range.
Image without WDR.
Image with WDR.
Note
If you use WDR, you may experience some WDR artifacts in the image.
Find out more about WDR and how to use it at axis.com/web-articles/wdr
How to stabilize a shaky image with Electronic Image Stabilization (EIS)
EIS can be used in environments where the product is mounted in an exposed location and subject to vibrations, for example, wind
or passing traffic. Turn on EIS to get a smoother and steadier image without blur.
EIS also reduces the file size of the compressed image and lowers the bitrate of the video stream.
Note
When EIS is turned on the image is cropped slightly, lowering the maximum resolution.
1. Go to Settings > Image.
2. Turn on EIS.
How to monitor long and narrow areas
Use corridor format to better utilize the full field of view in a long and narrow area, for example a staircase, hallway, road, or tunnel.
12