Folded Optics; Other Considerations; Installing The Optional Anamorphic Lens Mount; Package Contents - Runco LIGHTSTYLE LS-10I Installation & Operation Manual

In rear-screen applications where space behind the projector is limited, a mirror may be
used to fold the optical path, as shown in Figure 3-6. The position of the projector and
mirror must be accurately set. If you are considering this type of installation, contact your
dealer for assistance.
Screen
Figure 3-6. Folded Optics
Other considerations and tips that can help improve your installation:
• Keep the ambient temperature constant and below 35°C (95°F). Keep the projector
away from heating and/or air conditioning vents. Changes in temperature may cause
drifts in the projector circuitry, which may affect performance.
• Keep the projector away from devices that radiate electromagnetic energy such as
motors and transformers. Common sources of these include slide projectors,
speakers, power amplifiers and elevators.
If you are installing a standard LS-10i (without an anamorphic lens), skip this step and
proceed with Mounting the LS-10i (page 27).
If you are installing an LS-10i with an anamorphic lens, proceed as follows to install the
lens mount and transport assembly.
1. Do not install the anamorphic lens yet, only the lens mount and
Note
2. Some components shipped with your projector may differ slightly
The LS-10i Anamorphic lens mount kit consists of the following items. Some components
shipped with your projector may differ slightly from what is shown in these instructions. If
any items are missing or damaged, please contact your Runco dealer or Runco Customer
Service at (800) 23RUNCO.
Runco LS-10i Installation/Operation Manual
Mirror
transport assembly. You will install the anamorphic lens after you
install the projector and adjust the primary lens.
from what is shown in these instructions.
21
Installation

Folded Optics

Other Considerations

3.4
Installing the Optional
Anamorphic Lens
Mount

Package Contents