Deletion Of Blocks; Deleting Block By Block; Deletion Of All Blocks - Runco DTV-940 Owner's Operating Manual

Deletion of blocks

This item is password protected.
The delete function is used to clear all data (settings) from an adjustment block.
A delete can be given :
- block by block
or
- for all blocks.

Deleting block by block

The 'delete a block' function deletes the settings of a selected block.
Highlight 'Delete a block' with the control disc and press ENTER.
Push the control disc up or down to select the desired adjustment block. Press
ENTER to delete the selected adjustment block. A confirmation menu will be dis-
played.
ENTER will delete the selected block.
EXIT cancels the deletion procedure and returns to the Service mode main menu.

Deletion of all blocks

Highlight 'delete all blocks' with the control disc and press ENTER.
If you are certain you wish to delete all blocks, press ENTER to confirm, other-
wise press EXIT to return.
Once ENTER is pressed, all block headers and adjustment settings are perma-
nently removed and cannot be restored.
7-6