Bypassing; Unbypassing - GE Security Simon XT User Manual

Bypassing zones

Hide thumbs Also See for Simon XT:

Table of Contents

Bypassing a sensor allows you to open the sensor while the system is

armed. For example, if you Doors & Windows are armed and you want to

open your kitchen window but do not want to disarm the entire system, then

you can bypass the kitchen window sensor and then open the kitchen

window without causing an alarm. Bypassed sensors are automatically

unbypassed when the arming level is changed to a level where the sensor

is not active.

Bypassing

1. Press BYPASS and enter the master code.

2. Scroll up/down until you reach the sensor to be bypassed.

3. The display shows, for example, Sn 1 Front Door on the first line.

4. Press Enter to bypass (deactivate) the sensor.

5. When a sensor is bypassed, the panel displays Bypassed on the second line.

1. Press BYPASS and enter the master code.

2. Scroll up/down to the sensor to be unbypassed. The sensor must be currently

bypassed.

3. Press Enter to unbypass (reactivate) the sensor.

4. The panel removes the word Bypassed from the second line of the display

Table of Contents

Do you have a question about the Simon XT and is the answer not in the manual?