Pfaff SW W-SGG Operating Instructions Manual page 10

Wall-Mounted Wire Rope Winch SW W-SGG
English
with enclosed worm gear pair
Rope coiling – Wire rope attachment
< X°
rope direction
1
Unscrew the clamping screw
Operating Instructions
Safety Instruction
The winch is only suited for manual operation
Attention! Do not let go of the crank while you turn it. Danger of injury!
The length of the variable crank arm is adjustable. This enables to adept the length of the crank arm to the
load.
When pulling or pushing the crank arm make sure that there is enough free space. Pulling or pushing with
force may cause accidents.
Adjustment
⇒ loosen the adjusting screw
⇒ bring the crank arm into the required position
⇒ re-tighten adjusting screw
⇒ Before every use check firm seat of the crank arm
Lifting the load by turning the crank
in clockwise direction.
Lowering the load by turning the
crank in counter-clockwise direction.
design changes under reserve
ATTENTION:
With wrong rope coiling the brake is not effective.
Rope coiling has to be effected according to the drawing
(pay attention to rope direction).
For rope selection pay attention to the technical data for
the rope (see technical data)
Calculate the rope length in such a way that at least 3 full
turns of rope remain on the drum in lowest load position.
X ⇒ see page 2
2
Insert the rope in consideration of rope
winding direction.
F04.02.063
3
⇒ Tighten clamping screw
1
2
page 10