Advertisement
Quick Links
Advertisement
Related Manuals for Pfaff SEQUENCING
Summary of Contents for Pfaff SEQUENCING
- Page 1 Sequencing...
-
Page 2: Sequencing - Overview
Note: All symbols and options will not be shown at the same time. Sequencing can be used in both sewing mode and in embroidery mode. To open, just touch the sequencing symbol on the task bar. To close sequencing and sew your created combination, touch the symbol on the task bar again. - Page 3 Create a sequence The active position is marked by a cursor and the selected stitch or letter will be marked in red. Inserted stitches will be placed at the cursor position. Only the selected stitch can be adjusted. Move the cursor through the sequence using the arrows (10).
-
Page 4: Sequence Commands
Option bar Save options (15) You can save your sequence to a personal menu (15a) or to personal fi les (15b). Sequence commands (16) You can insert tie-offs, stop and thread snips commands into the sequence. These commands will be included in the sequence and will always be performed when sewing it. - Page 5 Adjustments made in sewing mode or embroidery mode will affect the whole sequence. However, these changes will not be saved if you return to sequencing. In embroidery edit, the position of the sequence will be kept. In sewing mode it is possible to start sewing anywhere in the sequence.
- Page 6 Important sequencing information Sequencing can be used in either sewing mode or embroidery mode. A sequence created when embroidery mode is active will become an embroidery design when saved and cannot be If embroidery mode is active, your sequence will sewn as a stitch in sewing mode.