Subscribe to Our Youtube Channel
Related Manuals for Jensen QiCR-50
Summary of Contents for Jensen QiCR-50
- Page 1 Dual Alarm Clock Radio with Wireless Charging MODEL: QiCR-50 USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE...
-
Page 2: Important Safety Instructions
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. - Page 3 17. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. 18. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
-
Page 4: Compliance With Fcc Regulations
COMPLIANCE WITH FCC REGULATIONS FCC ID KHKQI1110A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. -
Page 5: Dear Jensen Customer
The serial number of this product is found on its bottom. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: QiCR-50 Serial Number:... -
Page 6: Location Of Controls
LOCATION OF CONTROLS... - Page 7 WIRELESS CHARGING PAD AUX IN INDICATOR / MEM / M + BUTTON ALARM 2 INDICATOR (wake to alarm) HOUR / BUTTON ALARM 2 INDICATOR (wake to radio) MIN / BUTTON CHARGING INDICATOR DIMMER/SNOOZE/SLEEP BUTTON 16 LED DISPLAY BUTTON SPEAKER BUTTON FM ANTENNA AUX-IN JACK / MODE BUTTON...
- Page 8 2 x AAA batteries (Not included). POWER CONNECTION 1. Connect the cord of the power adaptor to the DC IN JACK (#20) of the QiCR-50. 2. Connect the plug of the power adaptor to a wall socket. The QiCR-50 is powered and in standby mode when you see the display is switched on.
-
Page 9: Alarm Operation
“PM”. If the PM INDICATOR (#9) is not showing on the LED DISPLAY (#16), the time displayed is “AM”. ALARM OPERATION The QiCR-50 features a dual alarm clock. To set the Alarms: 1. While in standby mode, press and hold the BUTTON (#6) to enter the ALARM 1 time setting mode. -
Page 10: Snooze Function
SNOOZE FUNCTION When the alarm sounds, tap the DIMMER/SNOOZE/SLEEP BUTTON (#5) to temporarily turn off the alarm and activate the snooze function, the alarm will stop and sound again 9 minutes later. If you tap the DIMMER/SNOOZE/SLEEP BUTTON (#5) again, the alarm will temporarily turn off again and sound again in 9 minutes and so on. -
Page 11: Aux In Operation
QiCR-50 to the Line-Out Jack on your external device, you • only need to adjust the volume control of your QiCR-50. If you connect to the Headphone Jack of your external device, you may need to adjust both the volume controls of your external device and QiCR-50 to obtain the desirable listening level. -
Page 12: Usb Charging
3. Unplug the charging cable when your device is fully charged. WARNING! The USB port located on the back of the QiCR-50 is only designed for charging a smart phone or portable device and does not support data transfer or connection to a computer. -
Page 13: Troubleshooting Guide
TROUBLESHOOTING GUIDE If you experience difficulties in the use of this clock radio, please check the following or call 1-800-777-5331 for Customer Service and support SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION Power does not Power adaptor connect unstable Reconnect adaptor come on No sound VOLUME control at minimum Increase Volume... - Page 14 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A. ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
Need help?
Do you have a question about the QiCR-50 and is the answer not in the manual?
Questions and answers