TCL AC12000E User Manual page 9

FAN SPEED BUTTON
The fan speed button should be repeatedly pressed to cycle between the available fan
speeds for the mode selected. The corresponding LED will be lit to show which fan speed
is selected.
IN COOLING MODE
There are 4 fan speeds available: High, Medium, Low, and Auto. In auto mode the air
conditioner will adjust the fan speed depending on the difference between the ambient
temperature and the temperature set. Please note changes in fan speed will be less
noticeable than in the fan mode.
IN FAN MODE:
There are 3 fan speeds available: High, Medium and Low. As well as the
corresponding LED showing the fan speed set, the display will also show
high speed,
IN DEHUMIDIFY MODE:
The fan speed cannot be set manually when the unit is in dehumidifier mode, the
screen will display
TIMER BUTTON
The inbuilt timer will allow you to set the unit to turn on or turn off after a set period of time,
Please note only one timer can be used at any time. Below 10 hours this can be set in 30
minute increments, and between 10 and 24 hours in 1 hour increments.
ON TIMER – The timer will turn on the unit automatically after the time set has elapsed.
The unit will start with the same settings as when the unit was put into standby.
1. When in standby, press the
desire the unit to start by pressing the
2. Once the set time has elapsed, the unit will turn on automatically.
3. Press the
normal and the timer will be cancelled
4. The function and fan speed can be set by turning the unit on, choosing the
settings and then putting the unit into standby before setting the timer.
OFF TIMER – The timer will turn off the unit automatically after the time set has elapsed.
1. While the unit is operating, press the
require the unit to run by pressing the
2. Once the set time has elapsed, the unit will turn off automatically.
3. If the
cancelled and the unit will turn off.
for medium speed and
, and the dry LED will be lit.
button before the time has elapsed and the unit will turn on as
button is pressed before the time has elapsed, the timer will be
for low speed.
button, then set the number of hours time you
and
button and then set how long you
and
Page 9 of 18
buttons
buttons.
for