TCL AC12000E User Manual page 11

TIMER BUTTON
The timer button on the remote offers the same functionality as the timer button on the main
unit.
ON TIMER – The timer will turn on the unit automatically after the time set has elapsed.
The unit will start with the same settings as when the unit was put into standby.
1. When on standby, press the
will show a
2. Set the number of hours time you desire the unit to start by
pressing the
3. Once the set time has elapsed, the unit will turn on
automatically.
4. Press the
normal and the timer will be cancelled
5. The function and fan speed can be set by turning the unit on, choosing the
settings and then putting the unit into standby before setting the timer.
OFF TIMER – The timer will turn off the unit automatically after the time set has elapsed.
1. While the unit is operating, press the
display will show a
2. Set how long you require the unit to run by pressing the
and
3. Once the set time has elapsed, the unit will turn off
automatically.
4. If the
cancelled and the unit will turn off.
FAN SPEED BUTTON
The Fan speed button allows you to cycle through the available fan speeds for the mode
selected. In fan mode the available options are Low, Medium and High. In cooling mode
an auto fan speed is also available, which will adjust the fan speed depending on the
difference between the temperature of the room, and the desired temperature set. In
dehumidifier mode it is not possible to amend the fan speed.
The fan speed selected will be shown on the right hand side of the display.
TEMPERATURE UNIT BUTTON
Press this button to change the display between showing the temperature in °C and °F
at the bottom next to "ON
and buttons
button before the time has elapsed and the unit will turn on as
at the bottom next to "OFF
buttons.
button is pressed before the time has elapsed, the timer will be
button twice, the display
"
button, the
Page 11 of 18
"