Options / Accessories; Drive Roll Kits; Alternative Magnum Gmaw Gun And Cable Assemblies; Magnum Gun Connection Kit (Optional K466-6 - Lincoln Electric Power MIG 260 Operator's Manual

®
POWER MIG 260

OPTIONS / ACCESSORIES

DRIVE ROLL KITS

Refer to Table C.1 for various drive roll kits that are available for
the POWER MIG® 260.The item in Bold is supplied standard with
®
the POWER MIG 260.
TABLE C.1
Wire Wire Size
Solid Steel .023"-.030" (0.6-0.8 mm)
.035" (0.9 mm)
.045" (1.1 mm)
.035"-.045" (0.9-1.1mm)
.040" (1.0mm)
Cored .035" (0.9 mm)
.045" (1.1 mm)
Aluminum 3/64" (1.2 mm)
.035" (0.9 mm)
K3675-1 Canvas Cover
K1738-1 Spool Gun Holder for Power MIG - provide
neat storage of spool gun cable, and gas hose for Power MIG. Also
provide hardware for routing gas inside Power MIG when using a
Prince XL gun. (Note: included in K1809-1 and K2310-1)
K468 Spindle Adapter - for 8" (203.2mm) O.D. spool.
K363P READI-REEL™ ADAPTER - The K363P Readi-
Reel Adapter mounts to the 2" spindle. It is needed to mount the
22-30 lb. Readi-Reels.
K435 Spindle Adapter for 14 lbs. coils - the K435 spin-
dle adapter allows 14lbs. (6kg.) Innershield coils to be mounted on
2" (51mm) O.D. spindle.
K3676-1 Dual Cylinder
ALTERNATIVE MAGNUM GMAW GUN AND CABLE
ASSEMBLIES
The following Magnum
separately available for use with the POWER MIG
rated 200 amps 60% duty cycle (or 250 amps 40% duty) and is
equipped with the integrated connector, twist-lock trigger
connector, fixed nozzle and insulator, and includes a liner,
diffuser, and contact tips for the wire sizes specified:
Drive Roll Kit
KP1696-030S
KP1696-035S
15' (4.6 m) K3081-2 .035 – .045" 0.9 – 1.2 mm
KP1696-045S
1
Optional liners for different wire diameters are sold separately,
KP1696-1
see table D.1 Maintenance Section.
KP1696-2
20' and 25' Magnum
KP1697-035C
K2951-3 Magnum
KP1697-045C
K2951-4 Magnum
KP1695-3/64A * Requires K466-6 adapter and KP44-3545-25 liner
KP1695-035A

MAGNUM GUN CONNECTION KIT (OPTIONAL K466-6)

Using the optional K466-6 Magnum
POWER MIG permits use of standard Magnum
gun and cable assemblies.

SPOOL GUN

Remove all input power to the POWER MIG
proceeding.
The POWER MIG
Spool Gun (with remote speed control).
It also provides gun trigger switch transfer between the machine's
use with its feeder gun or the spool gun for same polarity welding
with different wire and gas processes.
K2490-1 Magnum
K487-25 Magnum
K2445-1 Magnum
the K487-25 Magnum
connect to the POWER MIG
receptacle.
C-1
®
PRO 250L gun and cable assembly is
Length Part No. English Wire
Size
®
PRO Curve 300 Guns -
®
PRO Curve 300, 20'*
®
PRO Curve 300, 25'*
®
Connection kit for the
WARNING
®
260 provides direct connection and use of the
®
250LX
®
SG Spool Gun (requires K2445-1 Cable
Adapter)
®
SG Spool gun Control Cable Adapter. Allows
®
SG spool gun's 6-pin control cable plug to
®
260's 7-pin spool gun control cable
ACCESSORIES
®
260. Each is
Metric Wire
1
Size
®
200, 300 or 400
®
260 before