Internal Controls - Lincoln Electric Power MIG 260 Operator's Manual

®
POWER MIG 260

INTERNAL CONTROLS

5
1
3
1. Wire Drive Tension Pressure Adjustment – Permits increasing or
decreasing the pressure applied to the top drive roll.
2. Wire Drive Spindle – Supports a 4-inch or 8-inch spool of wire.
The center wing-nut can be adjusted to increase tension on the
wire.
3. Positive Output Receptacle – Permits attaching a work lead,
electrode stinger or the center wire drive polarity lead to DC
positive polarity. Rotate clockwise to lock into place.
4. Negative Output Receptacle – Permits attaching a work lead,
electrode stinger, or the center wire drive polarity lead to DC
negative polarity. Rotate connector clockwise to lock into place.
5. Thermal Breaker – The Power MIG 260 features a resettable 15
amp thermal breaker. If the current conducted through the
breaker exceeds 15 amps for an extended period of time, the
breaker will open and require manual reset.
2
4
B-3
OPERATION