Advertisement
Product View
1
2
4
6
7
12
10
15
11
1
Handle
2
TurboBrush® Tool
3
Crevice Tool
(stored inside Extension Wand)
4
Tank Release Button
5
Stretch Hose
6
Carry Handle
7
Filter
Cord Release
and Storage
Twist Cord Release
down to quickly
remove cord
4
www.BISSELL.com
5
3
8
9
14
13
8
Extension Wand
9
Power Cord
10 Bottom-Empty Dirt Tank
11
Height Adjustment Knob
12
Combination Dusting/Upholstery Tool
13
Lower Hose
14
ON/OFF Pedal
15
Recline Pedal
Assembly
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
1
Insert handle into
vacuum base until
you hear a "click."
3
Push hose end into
vacuum base until
you hear a "click."
5
NOTICE
Brush roll continues to turn while product is turned on and handle is in upright position. To
avoid damage to carpet, rugs, furniture, and flooring, avoid tipping vacuum or setting it on
furniture, fringed area rugs, or carpeted stairs during tool use.
NOTICE
With brush roll on, do not allow cleaner to sit in one location for an extended period of time,
as damage to floor can result.
2
Push lower cord
wrap in, aligning
two tabs, then turn
clockwise (down)
to lock into place.
4
Wrap the hose up and
around, then slide end
into vacuum base.
Store TurboBrush® tool on front in
holder.
Store Crevice Tool inside Extension
Wand and store Extension Wand
on side of vacuum.
Store the Combination Dusting/
Upholstery Tool on opposite side.
www.BISSELL.com
5
Advertisement
