Installation Requirements; Location Requirements - Samsung NX58M9960P Series Installation Manual

Installation requirements

Installation requirements

Location requirements

Clearances and dimensions
NOTE
• For OTR over Gas Stove, please follow local GAS CODE.
• BEFORE YOU BEGIN to install this appliance, refer to the following information,
dimensions, and clearances. Do not locate the range where it may be subject
to strong drafts. Provide adequate clearances between the range and adjacent
combustible surfaces. These dimensions must be met for safe use of the range.
The location of the electrical outlet and gas piping may be adjusted to meet
the following dimensions and clearances.
• For installation in Canada, a free-standing range is not to be installed closer
than 4.7 in (12 cm) from any adjacent surface.
CAUTION
This range has been designed to comply with the maximum allowable wood
cabinet temperature of 194 °F (90 °C). Make sure the wall covering, countertops,
and cabinets around the range can withstand the heat (up to 194 °F [90 °C])
generated by the range. If not, discoloration, delamination, or melting may occur.
12 English
NX58M9960PS_AA_DG68-01009A-00_EN.indd 12
30 in
4 in
Side Clearance
(10.2 cm) 6 in
Above Cooking
(15.2 cm)
Surface to Wall
24 in
(61 cm) Lower
36 in
Cabinet Depth
(91.4 cm)
NOTE
IMPORTANT: MAKE SURE the unit is supported by the leveling legs and NOT by the
cooktop itself.
13 in (33 cm)
30 in (76.2 cm)
Overhead
Cabinet Depth
30 in (76.2 cm)
18 in (45.7 cm)
0 in (0 cm)
Clearance
23.2 in
Below Cooking
(58.9 cm)
Top and at 0 in
Rear and Sides
(15.2 cm)
of Range
2017-07-14 4:09:10