Samsung NX58M9960P Series Installation Manual page 22

Installation instructions
Step 3. Convert to lp gas (optional)
All new gas ranges are shipped from the factory set up to use natural gas. Any
Samsung gas range can be converted to use LP gas. Refer to page 72 in the User
Manual to contact a qualified service technician.
The conversion process should only be performed by a qualified LP gas installer.
Conversion instructions and LP orifices will be supplied with the LP conversion kit.
The conversion to LP requires all burner orifices to be changed (4 surface burners
and 2 oven burners).
In addition, the nozzle on the gas pressure regulator needs to be reversed. All
replaced orifices must be left with the consumer, including the instructions and
retrofit sizes and orifice indication.
BURNER ORIFICE SIZES AND OUTPUT RATINGS
(LP Gas [Propane] 10 in WCP)
Burner Location BTU Rate
RF
LF
RR
LR
BAKE
BROIL
BURNER ORIFICE SIZES AND OUTPUT RATINGS
(Natural Gas 5 in WCP)
Burner Location BTU Rate
RF
LF
RR
LR
BAKE
BROIL
22 English
NX58M9960PS_AA_DG68-01009A-00_EN.indd 22
Orifice Size [mm]
14,500 In: 0.46 / Out: 0.74 (2 pcs)
11,500 1.04
4,000 0.62
11,500 1.04
15,000 1.15
11,500 1.02
Orifice Size [mm]
22,000 In: 0.85 / Out: 1.36 (2 pcs)
15,000 1.78
5,000 1.01
15,000 1.78
18,000 1.90
16,500 1.80
Step 4. Install the anti-tip device
WARNING
• To reduce the risk of tipping, the appliance must be secured by properly
installing the anti-tip device packed with the appliance.
• All ranges can tip, resulting in personal injury.
• Tipping ranges can cause burns from spills, personal injury, and/or death.
• To prevent accidental tipping, install and check the anti-tip bracket following
the instructions and template supplied with the bracket.
An anti-tip bracket and screws, installation
instructions, and template are shipped
with every range (PN DG94-00870B). The
instructions include information necessary
to complete the installation of the anti-tip
bracket. Read and follow the instructions on
the sheet and use the template for anti-tip
bracket installation. If not properly installed,
the range could be tipped by you or a child
standing, sitting, or leaning on an open oven
door.
*approximatel
Anti-Tip
To install the Anti-Tip bracket, release the
21/32" (16.5 mm)
bracket
leveling leg. A minimum clearance of 21/32"
(16.5 mm) is required between the range
bottom and the kitchen floor.
Screw must enter
wood or concrete
NOTE
2017-07-14 4:09:15