Samsung NX58M9960P Series Installation Manual page 27

To adjust flame low setting
Identify which burner is exhibiting too high or too low of simmer rate via manifold
panel graphics.
Simmer Set
Screw
Small Screwdriver
Valve Stem
NX58M9960PS_AA_DG68-01009A-00_EN.indd 27
1. Rotate a knob to "LO" position and
remove the knob from the valve stem
while the flame is lit.
2. Carefully push the screw driver into
the C channel of the valve, until it hits
the simmer set screw. Make sure the
screwdriver flathead is seated into the
set screw groove.
3. Rotate valve set screw clockwise to
decrease "LO" setting flame output, or
rotate set screw counter clockwise to
increase "LO" setting flame output.
Memo
English 27
2017-07-14 4:09:17