Installation Guide - Samsung NX58M9960P Series Installation Manual

Hide thumbs Also See for NX58M9960P Series:

User manual (120 pages)

User manual (132 pages)

Installation manual (84 pages)

Table Of Contents

Table of Contents

Minimum dimensions

CAUTION

•

If overhead cabinets are provided, a range hood should also be provided

that projects horizontally a minimum of 5 in (12.7 cm) beyond the front of

the cabinets. This will dissipate any heat buildup in the overhead cabinets

to prevent death, personal injury, and/or fire hazard. The ventilating hood

must be constructed of sheet metal not less than 0.0122" thick. Install above

the cooktop with a clearance of not less than 1/4" between the hood and the

underside of the combustible material or metal cabinet. The hood must be

at least as wide as the appliance and centered over the appliance. Clearance

between the cooking surface and the ventilation hood surface must never be

less than 24 inches.

•

Exception 1: Installation of a listed microwave oven or cooking appliance over

the cooktop shall conform to the installations packed with that appliance.

30-in (101.6-cm) minimum clearance between the top of the cooking

surface and the bottom of an unprotected wood or metal cabinet; or If no

30-in(101.6-cm) minimum clearance, 24-in (61-cm) minimum when the

bottom of the wood or metal cabinet is protected by not less than 0.25-in

(0.64-cm) flame-retardant millboard covered with not less than no. 28

MSG sheet steel, 0.015-in (0.038-cm) stainless steel, 0.024-in (0.061-cm)

aluminum, or 0.020-in (0.051-cm) copper.

18-in (45.7-cm) minimum between the countertop and the adjacent

cabinet bottom.

•

Exception 2 : For island installation, maintain 2-1/2" minimum from cutout

to back edge of countertop and 4" minimum from cutout to side edges of

countertop.

NX58M9960PS_AA_DG68-01009A-00_EN.indd 13