Wi-Fi Hotspot Mode - Vivitek NovoPRO User Manual

Logging in a Wi-Fi Network with 802.1x Authentication:
When you connect to a Wi-Fi network with 802.1x authentication (for
example, radius server), you will need to enter the following fields to set
up the connection properly:
 Network SSID  Your network
 Security  802.1x Enterprise
 Choose the right settings for
o EAP method
o Phase 2 authentication
 Identity  Your username (such as
 Password  Your password
Click on button "Connect" to start the connection.

2.1.3 Wi-Fi hotspot mode

A newly unpacked NovoPRO starts up in Wi-Fi Hotspot mode, where you can start using it without
any entanglement with networking setup. The default SSID for this Wi-Fi Hotspot is "NVC_XXXXX"
(for example, "NVC_7EAB7" in the following screenshot), where "XXXXX" is a device-generated text
string. Please note that Android mirroring (GoogleCast) is disabled in this mode. In comparison,
AirPlay mirroring has no such limitation.
)
DOMAIN\John.Smith
NovoPro User Manual V2.5
Page 20