Table of Contents
Advertisement
Quick Links
Copyright
This publication, including all photographs, illustrations and software, is protected under international copy-
right laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be
reproduced without written consent of the author.
© Copyright January, 2008
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no repre-
sentations or warranties with respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
Trademark Recognition
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations and pend-
ing applications in other countries throughout the world.
All other product names used in this manual are the properties of their respective owners and are ac-
knowledged.
— i —
Advertisement
Table of Contents
Related Manuals for Vivitek D326
Summary of Contents for Vivitek D326
- Page 1 Copyright This publication, including all photographs, illustrations and software, is protected under international copy- right laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. © Copyright January, 2008 Disclaimer The information in this document is subject to change without notice.
- Page 2 — ’ — ’ — ’ Important Safety Information Important: It is strongly recommended that you read this section carefully before using the projector. These safety and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this manual for future reference.
- Page 3 Power Safety Only use the supplied power cord. Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic. Remove the batteries from the remote control when storing or not in use for a prolonged period. Replacing the Lamp Replacing the lamp can be hazardous if done incorrectly.
- Page 4 — ’ — ’ — ’ Main Features • Lightweight unit, easy to pack away and transport. • Compatible with all major video standards including NTSC, PAL, and SECAM. • A high brightness rating allows for presentations in daylight or in lit rooms. •...
-
Page 5: Table Of Contents
GETTING STARTED ... 1 ... 1 ACKING HECKLIST ... 2 IEWS OF ROJECTOR ARTS Front-right View ... 2 Top view—On-screen Display (OSD) buttons and LEDs ... 3 Rear view ... 4 Bottom view... 5 ... 6 EMOTE ONTROL ARTS EMOTE ONTROL PERATING ROJECTOR AND... - Page 6 — ’ — ’ — ’ ... 39 PECIFICATIONS Input connectors... 39 V.S. P ROJECTION ISTANCE ROJECTION ... 41 IMING ABLE ... 45 ROJECTOR IMENSIONS REGULATORY COMPLIANCE ... 46 FCC W ... 46 ARNING ... 46 ANADA ... 46 AFETY ERTIFICATIONS EN 55022 W ...
-
Page 7: Getting Started
Packing Checklist Carefully unpack the projector and check that the following items are included: CABLE Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It is recommend that you keep the original packing material should you ever need to return the equipment for warranty service. -
Page 8: Views Of Projector Parts
— ’ — ’ — ’ Views of Projector Parts Front-right View ABEL Ventilation opening Height-adjuster button Height adjuster Lens cap IR receiver Lens Focus ring Zoom ring Function keys Important: Ventilation openings on the projector allow for good air circulation, which keeps the projector lamp cool. -
Page 9: Top View-On-Screen Display (Osd) Buttons And Leds
Top view—On-screen Display (OSD) buttons and LEDs ABEL (Power) ▲ (Up cursor) Power LED Over Temp LED Ready LED Menu ◄ (Left cursor)/ Source ▼ (Down cursor) / Quick Menu ► (Right cursor)/ Auto ESCRIPTION Turns the projector On or Off Navigates and changes settings in the OSD Green Power On... -
Page 10: Rear View
— ’ — ’ — ’ Rear view ABEL AC IN AUDIO S-VIDEO VIDEO DIGITAL VIDEO (For D326WX only) (Security Lock) Note: If your video equipment has both S-VIDEO and RCA jacks (composite video) connect to the S-VIDEO connector. S-VIDEO provides a better quality signal. ESCRIPTION Connect the POWER CABLE Connect the USB CABLE from a computer... -
Page 11: Bottom View
Bottom view ABEL Lamp cover Lens cap hook Tilt adjustor Height adjustor button Height adjustor ESCRIPTION Remove when changing the lamp. Place strap through to fasten the lens cap cover. Rotate adjuster lever to adjust angle position. Push to release adjustor. Adjuster drops down when adjuster button is pushed. -
Page 12: Remote Control Parts
— ’ — ’ — ’ Remote Control Parts Important: 1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluo- rescent lights can disrupt remote control operation. 2. Be sure nothing obstructs the path between the remote control and the projector. If the path be- tween the remote control and the projector is obstructed, you can bounce the signal off certain reflective surfaces such as projector screens. - Page 13 ABEL Up cursor Enter Power Right cursor Volume + Volume - Mute Freeze Source Auto Keystone top Keystone bottom Down cursor Left cursor Menu ESCRIPTION Navigates and changes settings in the OSD Changes settings in the OSD Turns the projector On or Off Navigates and changes settings in the OSD Increase volume Decrease volume...
-
Page 14: Remote Control Operating Range
— ’ — ’ — ’ Remote Control Operating Range The remote control uses infrared transmission to control the projector. It is not necessary to point the remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and 15 degrees above or below the projector level. -
Page 15: Setup And Operation
Inserting the Remote Control Batteries Remove the battery compartment cover by sliding the cover in the direction of the arrow. (A) Pull out the cover. (B) Insert the battery with the positive side facing up. Replace the cover. Caution: 1. Only use a 3V lithium battery (CR2025). 2. -
Page 16: Connecting Input Devices
— ’ — ’ — ’ Connecting Input Devices A PC or notebook computer and video devices can be connected to the projector at the same time. Video devices include DVD, VCD, and VHS players, as well as movie camcorders and digital still cameras. Check the user manual of the connecting device to confirm it has the appropriate output connector. -
Page 17: Starting And Shutting Down The Projector
Starting and Shutting down the Projector Connect the power cord to the projector. Connect the other end to a wall outlet. Power and Ready LEDs on the projector light. Turn on the connected devices. Ensure the Ready LED displays a solid orange and not a flashing orange. - Page 18 — ’ — ’ — ’ When the “Power Off? /Press Power again” message appears, press the Pow- er button. The projector turns off. Caution: 1. Be sure to remove the lens cap before starting projector. 2. Do not unplug the power cord until the Ready LED stops flashing–indicating the projector has cooled down.
-
Page 19: Setting An Access Password (Security Lock)
Setting an Access Password (Security Lock) You can use the four (arrow) buttons to set a password and prevent unauthorized use of the projector. When enabled, the password must be entered after you power on the projector. (See Navigating the OSD on page 18 and Setting the OSD Language on page 19 for help on using OSD menus.) Important: Keep the password in a safe place. - Page 20 — ’ — ’ — ’ You can use the cursor buttons ▲▼◄► either on keypad or IR remote control for password entry. You can use any combination including the same arrow five times, but not less than five. Press the cursor buttons in any order to set the password.
-
Page 21: Adjusting The Projector Level
Adjusting the Projector Level Take note of the following when setting up the projector: • The projector table or stand should be level and sturdy. • Position the projector so that it is perpendicular to the screen. • Ensure the cables are in a safe location. You could trip over them. To raise the level of the projector, lift the projector [A] and press the height-adjuster button [B]. -
Page 22: Adjusting The Zoom, Focus And Keystone
— ’ — ’ — ’ Adjusting the Zoom, Focus and Keystone Use the Image-zoom control (on the projector only) to resize the pro- jected image and screen size Use the Image-focus control (on the projector only) to sharpen the pro- jected image Use the Quick Menu but- ton on the projector or... -
Page 23: Adjusting The Volume
Adjusting the Volume Press the Volume +/- buttons on the remote control. The volume control appears on the display. Press the Down Cursor button on the keypad to adjust Volume +/-. Press the Mute button to turn off the volume (This feature is available only on the remote). -
Page 24: On-Screen Display (Osd) Menu Settings
OSD Menu Controls The projector has an OSD that lets you make image adjustments and change various settings. Navigating the OSD You can use the remote control cursor buttons or the buttons on the top of the projector to navigate and make changes to the OSD. -
Page 25: Setting The Osd Language
– ’ – ’ – ’ Setting the OSD Language Set the OSD language to your preference before continuing. 1. Press the Menu button. Press the cursor ◄► button to navigate to Installation I. 2. Press the cursor ▲▼ button until Language is highlighted. 3. -
Page 26: Osd Menu Overview
— ’ — ’ — ’ OSD Menu Overview Use the following illustration to quickly find a setting or determine the range for a setting. – 20 –... -
Page 27: Osd Sub-Menu Overview
– ’ – ’ – ’ OSD Sub-Menu Overview – 21 –... -
Page 28: Image Menu
— ’ — ’ — ’ Image Menu Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Image Menu. Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to change values for settings. -
Page 29: Color Manager
Color Manager Press (Enter) / ► to enter the color manger sub menu. Select to enter the Red Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Select to enter the Green Color Manager. Green Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Select to enter the Blue Color Manager. -
Page 30: Computer Menu
— ’ — ’ — ’ Computer Menu Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Com- puter menu. Press the cursor ▲▼ button to move up and down in the computer menu. Press ◄► to change values for settings. -
Page 31: Video/Audio Menu
Video/Audio Menu Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Vid- eo/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu. Press ◄► to change values for settings. Video AGC Press the ◄►... -
Page 32: Installationi Menu
— ’ — ’ — ’ Installation I Menu Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion I menu. Press the cursor ▲▼ button to move up and down in the Installation I menu. Press ◄►... -
Page 33: Installation Ii Menu
Installation II Menu Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion II menu. Press the cursor ▲▼ button to move up and down in the Installation II menu. Auto Power Off Press the cursor ◄►... -
Page 34: Osd Menu Setting
— ’ — ’ — ’ OSD Menu Setting Menu Position Press ◄► button to select different OSD location. Translucent Menu Press ◄► button to select OSD background translucent level. Menu Display Press ◄► button to select OSD timeout delay. ESCRIPTION –... -
Page 35: Peripheral Test
Peripheral Test Press (Enter) / ► to test the IR remote controller for diagnostic. Remote Control Test (Enter) / ► to test the button on keypad. Button Test Press Press (Enter) / ► to select different colors on screen. Color Test Sound Test Press (Enter) / ►... -
Page 36: Factory Reset
— ’ — ’ — ’ Factory Reset Press the cursor ▲▼ button to move up and down in the Installation II menu. Select the Factory Reset sub menu and press Status Press the cursor ▲▼ button to move up and down in the Installation II menu. Select the Installation II sub menu and press Active Source Display the activated source. -
Page 37: Maintenance And Security
Replacing the Projection Lamp The projection lamp should be replaced when it burns out. It should only be replaced with a certified replacement part, which you can order from your local dealer. Important: a. The projection lamp used in this product contains a small amount of mercury b. - Page 38 — ’ — ’ — ’ Remove the two screws from the lamp module (A). Lift the module handle up (B). Pull firmly on the module han- dle to remove the lamp module. – 32 –...
-
Page 39: Resetting The Lamp
Reverse steps 1 to 5 to install the new lamp module. While installing, align the lamp module with the connec- tor and ensure it is level to avoid damage. Note: The lamp module must sit securely in place and the lamp connector must be con- nected properly before tightening the screws. -
Page 40: Cleaning The Projector
— ’ — ’ — ’ Cleaning the Projector Cleaning the projector to remove dust and grime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so could result in a severe burn. -
Page 41: Using The Kensington Lock
® Using the Kensington If you are concerned about security, attach the projector to a permanent object with the Kensington slot and a security cable. Note: Contact your vendor for details on purchasing a suitable Kensington security cable. The security lock corresponds to Kensington’s MicroSaver Security System. If you have any com- ment, contact: Kensington, 2853 Campus Drive, San Mateo, CA 94403, U.S.A. -
Page 42: Troubleshooting
Common problems and solutions These guidelines provide tips to deal with problems you may encounter while using the projector. If the problem remains unsolved, contact your dealer for assistance. Often after time spent troubleshooting, the problem is traced to something as simple as a loose con- nection. -
Page 43: Led Error Messages
LED Error Messages RROR ESSAGES Over temperature Thermal break status error Lamp error Fan1 error Fan2 error Fan3 error Lamp door open DMD error Color wheel error In the event of an error, please disconnect the AC power cord and wait for one (1) minute before re- starting the projector. -
Page 44: Lamp Problems
— ’ — ’ — ’ Lamp Problems Problem: There is no light from the projector 1. Check that the power cable is securely connected. 2. Ensure the power source is good by testing with another electrical device. 3. Restart the projector in the correct order and check that the Power LED is green. 4. -
Page 45: Specifications
Specifications Model Display type Resolution Projection distance Projection screen size Projection lens Zoom ratio Vertical keystone correction Projection methods Data compatibility SDTV/EDTV/ HDTV Video compatibility H-Sync V-Sync Safety certification Operation temperature Dimensions AC Input Power consumption Stand By Lamp Audio speaker Video Audio Security... - Page 46 — ’ — ’ — ’ Projection Distance V.S. Projection Size Screen width Maximum Screen Size (W) diagonal Projection Distance L WXGA 1.16m 0.76m 0.89m 3.8’ 30” 35” 2.32m 1.52m 1.78m 7.6' 60" 70" 3.47m 2.29m 2.67m 11.4' 90" 105" 4.63m 3.05m 3.55m...
-
Page 47: Timing Mode Table
Timing Mode Table The projector can display several resolutions. The following table outlines the resolutions that can be displayed by the projector. Signal Resolution NTSC PAL / SECAM 640 x 350 640 x 350 720 x 350 640 x 400 640 x 400 720 x 400 720 x 400... - Page 48 — ’ — ’ — ’ Signal Resolution Frequency 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 1024x768 Macbook 1280x720 相容性 1280x720 1280x720 1280x768 1280x768 1280x768 1280x800 1280x1024 1280x1024 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 1024x768 Mac book Pro 1280x720 (Intel) 相容性...
- Page 49 Signal Resolution Frequency 800x600 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 Power Mac G5 相容性 1024x768 1280x720 1280x720 1280x720 1280x768 1280x800 1280x1024 1280x1024 1280x1024 800x600 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 Power Mac G4 1024x768 相容性 1280x720 1280x720 1280x720 1280x768 1280x800 1280x1024...
- Page 50 — ’ — ’ — ’ Signal Resolution Frequency 1920 x 1080 HDTV 1920 x 1080 1280 x 720 720 x 576 SDTV 720 x 480 ○: Frequency supported －: Frequency not supported • The resolution of the panel for the XGA is 1024 x 768 and 1280 x 768 for the WXGA. Resolution other than native resolution may display with uneven size of text or lines.
-
Page 51: P Rojector D Imensions
– ’ – ’ – ’ Projector Dimensions 220 mm (8.6 inches) – 45 –... -
Page 52: Fcc W Arning
FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communica- tions.