Wi-Fi Client Mode - Vivitek NovoPRO User Manual

NovoPro User Manual V2.5

2.1.2 Wi-Fi client mode

In this mode, NovoPRO functions as a client to join an existing Wi-Fi network. As illustrated in the
 Wi-Fi
following diagram, to set up the Wi-Fi connection, on NovoPRO home screen, click on
 Connect to Wi-Fi  Configure  Wi-Fi (ON). Then select the desired Wi-Fi SSID (the name
associated with the Wi-Fi network) and enter the proper credentials when necessary.
You may notice that you have the choice of using "DHCP" or "Static IP" in the connection dialog,
which is exactly the same as Ethernet connection.
2
1
Wi-Fi Network Optimization: To achieve good user experience with NovoPRO devices deployed in
your organization's Wi-Fi network, it is recommended that you keep an eye on RF interference, Wi-
Page 18