Compatible Camera Models; Technical Data - Quadralite NAVIGATOR X2 C Instruction Manual

Compatible Flash Models
Navigator X USB and Navigator X C receiver settings:
Navigator X
ON ON ON
USB receiver
( Code Switch)
Navigator X C
receiver
CH01 CH02 CH03
(Display Screen)
Navigator X
ON ON ON
USB receiver
( Code Switch)
Navigator X C
receiver
CH09 CH10 CH11
(Display Screen)

Compatible Camera Models

This flash trigger can be used on the following Canon EOS series camera models:
1Dx Mark II 1Dx 5Ds/5Dsr
7D Mark II 7D 6D 80D
40D 30D 750D/760D 700D
500D 450D 400D Digital 350D DIGITAL
1100D M5 M3
1. This table only lists the tested camera models, not all Canon EOS series cameras. For the compatibility
of other camera models, a self-test is recommended.
2. Rights to modify this table are retained.
3. The cameras which are released before 2012 do not have TTL mode in their D and E group.
ON ON ON ON
CH04 CH05 CH06 CH07
ON ON ON ON
CH12 CH13 CH14 CH15
5DⅣ 5D Mark III 5D Mark II
70D 60D 50D
650D 600D 550D
100D 1200D 1000D
- 24 -

Technical Data

Model
Compatible cameras
ON
Power supply
Flash Exposure Control
CH08
TTL autoflash
ON
Manual flash
Stroboscopic flash
Function
CH16
High-speed sync
Second-curtain sync
Flash exposure
compensation
Flash exposure lock
5D
Focus assist
Modeling lamp
Beeper
Wireless setting
ZOOM setting
TCM function
Navigator X2 C
Canon EOS cameras (E-TTL II autoflash)
Support for the cameras that have PC sync socket.
2*AA batteries
E-TTL II
Yes
Yes
Yes
Yes
Yes, ±3 stops in 1/3 stop increments
Yes
Yes
Control the modeling lamp by the flash trigger
Control the beeper by the flash trigger
The receiver end can control the camera shooting through the
2.5mm sync cord jack
Adjust the ZOOM value by the transmitter
Transform the TTL shooting value into the output value in the M node
- 25 -