Edid Configuration; Edid Management - Hall Research Technologies HSM-88-4K User Manual

4.0 EDID management

The HSM-88-4K gives users the flexibility to configure the EDID for each input.
The source for the EDID data associated with each input can be from one of 15
standard built-in choices or copied from any of the TVs connected to a
particular output. There is also an advanced mode for dynamic "on-the-fly"
EDID Computation to guarantee that all displays connected to any input will be
able to display the video from that input (as explained below in Section 4.2).
By default, the EDID for all inputs are set to 1080p video with 2-channel audio
for maximum compatibility but users can easily change the EDID used at all or
any of the inputs.
This option allows the user to choose a specific EDID table and load it into any

4.1 EDID Configuration

selected input port on the matrix. HSM-88-4K comes with 15 common EDIDs
saved in its internal memory or you can copy the EDID of any TV connected to
outputs.
Press MENU and navigate to "EDID Config" and press SET.
Browse through the 15-different preset EDIDs or any of the eight EDIDs

of the current outputs.

Press SET to select the EDID.
Select an input to copy the EDID.

Press SET to load the EDID to selected input.


Note: If you decide to copy EDID from an output, but the EDID of the output is not valid (for
example if the output is disconnected), the Matrix does not modify the input EDID and will
Below are the choices of EDIDs under EDID Config menu:
display an error message.
1
Index
2
3
4
5
6
7
8
1080p Video, 2 Ch Audio
EDID Description
1080p Video, 5.1 Audio
1080p Video, 7.1 Audio
1080i Video, 2 Ch Audio
1080i Video, 5.1 Audio
1080i Video, 7.1 Audio
1080p 3D Video, 2 Ch Audio
1080p 3D Video, 5.1 Audio
© Copyright 2018 Hall Research, Inc.
4K 8X8 HDMI Matrix Switch
11