Fortimail-5001A Mounting Components - Fortinet FortiMail-5001A Hardware Manual

Hide thumbs Also See for FortiMail-5001A:
Table of Contents

Advertisement

Hardware installation

FortiMail-5001A mounting components

FortiMail-5001A Hardware Guide
Version 3.0 MR5
http://docs.fortinet.com/
Feedback
An electrostatic discharge (ESD) preventive wrist strap with connection cord
Caution: FortiMail-5001A boards must be protected from static discharge and physical
shock. Only handle or work with FortiMail-5001A boards at a static-free workstation.
Always wear a grounded electrostatic discharge (ESD) preventive wrist strap when
handling FortiMail-5001A boards.
1 Attach the ESD wrist strap to your wrist and to an available ESD socket or wrist strap
terminal.
2 If you have installed the FortiMail-5001A board in a chassis, remove it.
For removal instructions, see
3 Use
Figure 6
to locate SW11 on the FortiMail-5001A board.
The top of the FortiMail-5001A board is covered with a copper heat sink. The printed
circuit board is under the copper heat sink. SW11 is located on the printed circuit board
and is accessible from the left side of the FortiMail-5001A board under the copper heat
sink (see
Figure
6).
Figure 6: Location of SW11 on the FortiMail-5001A board
Location of SW 11
Factory Default (Shelf Manager Required)
1 Off
ON
2 On
SW11
3 Off
4 Off
1
2
3 4
Standalone Mode for FortiGate-5020
(no Shelf Manager)
1 Off
ON
2 On
SW11
3 On
4 Off
1
2
3 4
4 If required, change SW11 to the correct setting.
5 Insert the FortiMail-5001A board into a chassis and verify that the board starts up and
operates correctly.
For inserting instructions, see
To install a FortiMail-5001A board you slide the board into an open slot in the front of an
ATCA chassis and then use the mounting components to lock the board into place in the
slot. When locked into place and positioned correctly the board front panel is flush with the
chassis front panel. The board is also connected to the chassis backplane.
FortiMail-5001A mounting components
"Removing a FortiMail-5001A board" on page
FortiManager-5001A
board (top view)
FortiManager-5001A
Front Faceplate
"Inserting a FortiMail-5001A board" on page
15.
12.
11

Advertisement

Table of Contents
loading

Table of Contents