Troubleshooting - Furuno BBWX2 Installation Manual

Satellite receiver/switch
Table of Contents

Advertisement

5.4 Troubleshooting

The LEDs on the unit indicate the following conditions:
Satellite Receiver LED
GREEN – single long
green every 3 seconds
AMBER – two flashes
(long-short) every 3
seconds
AMBER – three short
flashes every 3 seconds
AMBER – alternating
between the two above
conditions
RED – repeating short
red flashing (on/off for
equal intervals)
RED – repeating long red
flash (on longer than off)
RED – alternating
between the two above
RED – repeating group of
three short red flashes
U.S.A
.
Status
Normal Operation
Display not Connected
Antenna not connected
Both Antenna and Display
not connected
Ethernet failure
Sirius module failure
Sirius and Ethernet failure
Antenna shorted
BBWX2 INSTALLATION GUIDE
Actions
None
Connect MFD display to BBWX2,
Turn on display, or
Replace Ethernet cable
Check antenna cable connections
Connect Display and Antenna
Unit failure. Call Dealer
Unit failure. Call Dealer
Unit failure. Call Dealer
Check antenna cable, or
Replace antenna cable (if damaged)
Page 14 of 15

Advertisement

Table of Contents
loading

Table of Contents