Ultra electronics VersaMux-4000 Operations & Installation Manual page 86

Configure
Configure
Offline
Aggregate
Aggregate
Parameters
Figure 5-12
NOTE:
Page 5-16
Front Panel Interface
Figure 5-12 shows the Offline sub-menu structure and navigation from the front
panel interface.
Port-1
Port
Parameters
Parameter
ENTER
Options
Accessing Offline Sub-Menu Parameter Options
Aggregate
When you select Aggregate from the Offline sub-menu, the system displays the
aggregate parameters and the current value for each.
The Aggregate parameters are:
• Card-Type (read-only for Release 1.0 software)
• Function
• Mode
• Rate
• RxClkSense
• TxClkSense
• TxClkSrc
• Mark-Sense
• Sync-Inhibit
Since a parameter value has an affect on the other parameters, we highly
recommend that you configure the aggregate parameters in the order listed above
(Function then Mode then Rate etc.).
VersaMux-4000 Operation & Installation Guide
Chapter 5: Operating Instructions
Ports 2,
3 & 4
Port
ENTER
Options
Copy-Config
Options
ENTER
Copy_Config
Options
Part No. 24001157
Revision C