Ultra electronics VersaMux-4000 Operations & Installation Manual page 156

Software Upgrade Procedure
Figure 7-10
Page 7-14
Continuing at the New Terminal Rate
7. To upgrade the application code, you must first erase the existing
code. To erase the application code, type:
2
then press the Enter key.
8. When the system prompts:
Are you sure? Y/N (N)
type:
y
then press the Enter key to confirm. The system erases the application
code as shown in
VersaMux-4000 Operation & Installation Guide
Figure 7-11.
Chapter 7: Maintenance
Part No. 24001157
Revision C