Table of Contents
Advertisement
Chapter 3: Installation
Figure 3-8
Part No. 24001157
Revision C
3.
Mount the Rear Support Brackets to the Support Brackets using #10
flat washers, #10 lock washers, and 10-32 x 3/8-inch screws as
shown in
Figure
Brackets to slide back and forth.
bracket assemblies.
Left-Hand Side (when viewed from the rear of the chassis)
Support Bracket and Rear Support Bracket
Right-Hand Side (when viewed from the rear of the chassis)
Support Bracket and Rear Support Bracket
Assembling the Rear Mounting Brackets
VersaMux-4000 Operation & Installation Guide
Rear Support Bracket Kit Installation
3-8.; leave them loose enough for the Support
Figure 3-9
shows the completed
Page 3-11
Advertisement
Chapters
Table of Contents
