Motorola MTP810 Ex Quick Start Manual page 2

More Information on the Radio
Visit the Motorola Solutions Web site at:
http://www.motorolasolutions.com/tetraterminals
Motorola Online
Feature User Guide and related documentation available at:
https://emeaonline.motorolasolutions.com/
Open Source Software Legal Notices
Available at: https://emeaonline.motorolasolutions.com/
and on Customer Programming Software Plus (CPS Plus) DVD
This document is copyright protected. Duplications for the purpose of the use of Motorola products are
permitted to an appropriate extent. Duplications for other purposes, changes, additions or other processing of
this document are not permitted. Only this electronically-saved document is considered to be the original.
Duplications are considered merely copies. Motorola Solutions, Inc., and its subsidiaries and affiliates do not
vouch for the correctness of such kinds of copies.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the stylized M Logo are registered in the U.S. Patent and
Trademark Office. All other product or service names are the property of their respective owners.
© 2013 Motorola Solutions, Inc. All rights reserved.
68015000200-B
@68015000200@
When printed by Motorola
Quick Start Guide
MTP810 Ex
Icons
Icon Description
In Service (TMO)
No Service (TMO)
Signal Strength
Direct Mode (DMO)
Gateway Mode(DMO)
Repeater Mode (DMO)
Emergency Mode
Talkgroup Scrolling
Scan (TMO)
Battery Level
All/Simplex/Duplex Ring Muted
Low Audio
High Audio
Speaker Off
Turning the Terminal On/Off
Icon Description
To power the terminal on/off, press and hold On/Off Key.
New Message Has Arrived
Using the Terminal Menu
New Message(s)
To enter the menu, press the Menu Key.
To scroll through the menu, press the Up or Down Navigation Key.
Packet Data
To select a menu item, press Select or the Right Navigation Key.
To return to previous level, press Back or the Left Navigation Key.
GPS
To exit the menu items, press the Home Key.
WAP
Selecting Trunked/Direct Mode Operation
End-to-End Encryption
Man Down Active
From the Home display press Optns, select Trunked Mode or Direct Mode.
Man Down Alert
Making a TMO/DMO Group Call
Man Down Failure
Enter TMO or DMO. From the Home display navigate to the desired group. Press
Select (if configured). Press and hold the PTT. Wait for the talk permit tone (if
RUI Logon
configured) and talk. Release the PTT to listen.
RUI Packet Data
Making a TMO/DMO Emergency Group Call
Call Out
RMS Enter TMO or DMO. Press and hold the Emergency Button. Emergency alarm is
sent automatically. Press and hold the PTT. Wait for the talk permit tone (if
configured) and talk. Release the PTT to listen.
WAP Box
If using Hot Mic feature, wait for the Emgcy Mic On message to appear on the
display and talk without pressing the PTT.
To exit Emergency Mode, press and hold Exit soft key.
Making a Simplex Private Call
From the Home display dial a number using Software Numeric Keypad (a shortcut
needs to be assigned to a Function Key or a Navigation Key - refer to the Feature User
Guide for details). Press and release PTT. The ringing sounds. The called party
answers. Wait for the called party to finish speaking. Press and hold PTT. Wait for the
talk permit tone (if configured) and talk. Release PTT to listen. Press the End Key to
terminate the call.
Making a Duplex Private Call/Phone/PABX Call
From the Home display dial a number. Press and release the Send Key. The ringing
sounds. The called party answers. Press the End Key to terminate the call.
Sending a New Message
Press the Menu Key and select Messages > New Message. Write your message.
Select Send. Select your message recipient. Select Send, or press the Send Key to
send the message.
Sending a Status Message
Select the desired group, then press the Menu Key and select Messages > Send
Status. Select a status and press the Send Key or PTT.