Table of Contents
Advertisement
Chapter 3: Remote Service
5.6 Motion Config:
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
Setup each camera's motion detection here.
Add a new motion detection window:
1. Select a camera from the camera list.
2. Click the "Add" button to add a new motion detection
window.
3. Move the new motion window to the place where you need
to detect.
4. Modify the motion window name.
5. Select detect area as "include" or "exclude" motion
window.
6. Define the motion detection object size.
7. Define the motion detection sensitivity.
8. Click the "Update" button to transform the new settings to
the camera.
Modify a motion detection window:
1. Select a camera from the camera list.
2. Select a motion window from the motion window list.
3. Move the motion window to the place where you need to
detect.
4. Modify the motion window name.
5. Select detect area as "include" or "exclude" motion
window.
93
MVS 5200/5210/MVS 5210-R Series & NANO 1190 NVR User Manual
Advertisement
Table of Contents
