Manual Setting - Nexcom NANO 1190 User Manual

Chapter 1: Main Console
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
Adjust:

Manual Setting:

Click setting to enter the date-time setting dialog, and select
current date and time now, click "OK" to change system
time or click "Cancel" button to abort configuration.
Synchronize with NTP:
Enable date-time synchronization with NTP service.
NTP Server:
Key in NTP server IP or domain name, if you use the domain
name to connect NTP server, the DNS service must be enabled.
NTP Sync Interval:
Select a value to set the interval of each time synchronization
with NTP service.
Time Zone:
Select the time zone of the NVR location.
Daylight saving:
Enable or disable daylight saving mode.
Daylight saving Start Time:
Configure daylight saving start time, it works with daylight
saving mode enabled.
Daylight saving End Time:
Configure daylight saving end time, it works with daylight
saving mode enabled.
Daylight saving Offset:
Configure daylight saving offset time with current time, it works
with daylight saving mode enabled.
20
MVS 5200/5210/MVS 5210-R Series & NANO 1190 NVR User Manual