Sub-Screen; Snapshot; Audio Volume Control - Nexcom NANO 1190 User Manual

Chapter 1: Main Console

3. Sub-screen:

Digital Zoom
Sub-screen window supports digital zoom, the operation steps are as
follows:
1. Click on preview image to switch current focus channel.
2. Scroll the mouse wheel, forward for digital zoom-in, and backward
3. Switch division mode will reset digital zoom status to default.
Popup Menu
Right click the mouse button, select an option from the popup menu.
1. Change current channel display camera.
2. Change current division mode.
3. Switch current channel display ratio mode.
4. Switch to Full Screen mode / Cancel Full Screen mode.
5. Reset all channels to default camera list.
6. Snapshot current display.
7. Enable / Disable Auto Switch.

4. Snapshot:

Click
snapshots at the system management "snapshot" page.

5. Audio Volume Control:

Click
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
for zoom-out.
to take a snapshot to the hard disk drive, you can manage
to switch between mute or unmute.
Status
System is on unmute mode.
System is on mute mode.
Description
MVS 5200/5210/MVS 5210-R Series & NANO 1190 NVR User Manual
6