Usage - Razor POWER A 2 Owner's Manual

USAGE

How to Ride
Do not activate the thumb throttle unless you are on the Power A
Put kickstand up.
Press the power button (A), the LED will light up.
Get on the scooter and place both hands on the handlebars. Kick to start (B), and then push the thumb throttle (C).
A
How to Stop
For controlled stops, release the throttle and apply the brake by putting pressure on the rear-fender brake. Razor
recommends that you practice applying the brake at various speeds and in an open area free from obstructions before
riding your scooter around others.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
and in a safe, outdoor environment suitable for riding.
2
C
B
7
Note: Electric scooter must be
moving at least 3 mph (5 km/h)
while engaging throttle to
engage motor.
Note: As an additional safety
feature, the scooter is designed to
cut power to the motor when brake
is applied.
Note: Motor will re-engage,
(without having to kick to start),
if brake is released and throttle is
applied before scooter has slowed
down to under 3 mph (5 km/h).
Note: Practice riding only in wide
open areas clear from curbs,
parking blocks and other obstacles.
Impacting the wheels against
any hard surface can damage the
wheels. Wheels are not covered
under the limited warranty.