Vision DVR-800-2015 Quick Setup Manual page 9

G-SENSOR
Regardless of the configuration the DVR will records G forces with the Video footage.
However the G-Sensor can be configured to record an alarm file and/or send an alarm output when
a G threshold level is exceeded
Set the THRESHOLD VALUES
to set the Trigger levels for a
G-Level alarm to be activated.
Note the z: value is a vector
value of the x-y-z forces.
To provide an output when a
G level alarm has been
activated turn the OUTPUT
ON.
NETWORK
The NETWORK settings are only used on DVR's with Live View and/or Wi-Fi Capability (although the
DVR can also be used as part of a wired Network). The use of these functions is covered in a
separate Manual
Set ALARM SWITCH to ON to
turn on the G-SENSOR alarm.
If the G Sensor is not correctly zeroed
(for example DVR not quite flat) use
ADJUST button to zero the sensor
Highlight the SAVE option and
press the ENTER button on the
r/c to save the changes.