R6/R12a Compact Active Line Array Sound Reinforcement System User Manual U M- R 6 / R 1 2 a - 2 0 1 3 0 5 2 0 v e r A...
Page 2
SAFETY INSTRUCTIONS PLEASE READ THIS MANUAL FIRST Thank you for a buying product. Read this manual first as it will help you operate the system properly. Please keep this manual for future reference. WARNING: This product must be installed by professionals. When using hanging brackets or rigging other than those supplied with the product, please ensure they comply with the local safety codes.
R6/R12a CONTENT Compact Active Line Array Sound Reinforcement System CONTENT PRODUCT INTRODUCTION Main Features Product Description Applications Introduction Of Amplifier Module INSTALLATION Mounting Accessories Installation Reference Installation Guidance CONNECTION TECHNICAL SPECIFICATIONS Specifications Frequency Response And Impedance Curve 2D Dimensions SOFTWARE APPLICATION GUIDE Product information subjects to be updated without notification, please visit www.elderaudio.com for the...
R6/R12a PRODUCT INTRODUCTION Compact Active Line Array Sound Reinforcement System R6/R12a Compact Active Line Array Sound Reinforcement System Main Features Compact design suitable for various application situations Up to 40kHz frequency range due to adoption of ribbon tweeter Low distortion due to utilization of unique thin foam surround &...
R6/R12a AMPLIFIER MODULE Compact Active Line Array Sound Reinforcement System Introduction Of Amplifier Module The amplifier module embedded in the system has been made some optimization based on previous version. RS-485 and USB port are added into it for computer connection, it will be very convenient for user to configurate system parameters by software.
R6/R12a INSTALLATION COMPACT LINE ARRAY SOUND REINFORCEMENT SYSTEM Compact Active Line Array Sound Reinforcement System Mounting Accessories(Optional) Installation Reference 1. Speaker stand 1. Hanging 2. Support Support 2. Support Speaker stand R12a 3. Push 4 inch wheel Warning: Make sure the mounting accessories safety...
INSTALLATION Compact Active Line Array Sound Reinforcement System Installation Guidance (1) Open the package; take out R6a, R12a and the accessories. (2) Install four U-rings into one flying frame. (3) Demount the ball-catch bolt from the pulling plate of R6a, place R12a pulling plate lockpin into the slot of R6a pulling plate with holes against each other;...
R6/R12a TECHNICAL SPECIFICATION Compact Active Line Array Sound Reinforcement System 2D Dimension Top view 750mm 659mm Front view Side view [29.5in] [26.0in] Back view...
R6/R12a SOFTWARE APPLICATION GUIDE Compact Active Line Array Sound Reinforcement System Software Application Guide How to get the software The software is stored in the CD with equipment packaging. The latest version also may be downloaded from the company website.
Page 12
R6/R12a SOFTWARE APPLICATION GUIDE Compact Active Line Array Sound Reinforcement System Software Application Guide 1.4> Device: Modify the device information, and saved in the equipment automatically, only valid on connection status; 1.5> Help: the control software version information. 2. Connecting the device.
Page 13
R6/R12a SOFTWARE APPLICATION GUIDE Compact Active Line Array Sound Reinforcement System Software Application Guide If found device, shown as Figure 4: Figure(4) Devices online are listed at left, the right part shows the information of the device chosen by user.
Page 14
R6/R12a SOFTWARE APPLICATION GUIDE Compact Active Line Array Sound Reinforcement System Software Application Guide 3. Recall or Save the configuration file. When the device used in different places, the different configuration file are necessary. Two ways are available for user to recall or save the configuration file.
Page 15
R6/R12a SOFTWARE APPLICATION GUIDE Compact Active Line Array Sound Reinforcement System Software Application Guide 3.3> For the files(or programs) in the device, it may be recalled through " List Program&Recall " in Program menu. See Figure 8: Figure(8) Select the program you want to use in the pop-out dialog box, then click "...
Page 16
R6/R12a SOFTWARE APPLICATION GUIDE Compact Active Line Array Sound Reinforcement System Software Application Guide 5. Change the current program name. Click Program menu, choose " " " Edit current program name " to change the program name, See Figure 10: Figure(10) 6.