Ra10 PRODUCT FEATURES Two way full range active coaxial plastic speaker. Computer aided design to optimism frequency and phase response. One 10 inch woofer and one 3 inch paper cone tweeter. HF/LF transducers are coaxially mounted sharing the same acoustic axis. Suitable for full range sound reinforcement applications, also can be used as a floor monitor.
Ra10 FRONT AND REAR PANEL FUNCTIONS 1. Over load indicator. 2. Signal indicator. 3. This is the volume control for the line level input (15), Increase the volume by rotating clockwise and decrease the volume by rotating counter-clockwise. Adjust to appropriate volume. 4.
Ra10 APPLICATION SAMPLE In this application the right line input or right line output is not required. 1. Stereo mode . (long distance) Ra10 Ra10 LINE IN LINE IN LINE IN LINE IN LINE OUT LINE LINE IN LINE IN LINE IN LINE IN LINE OUT...
Page 6
Ra10 APPLICATION SAMPLE 3. Stereo mode + Mic signal. Ra10 Ra10 LINE LINE LINE IN LINE IN LINE IN LINE IN LINE OUT LINE IN LINE IN LINE IN LINE IN LINE OUT R10s POWER R10s POWER OUTPUT OUTPUT LINE LINE IN LINE IN LINE IN...
Ra10 INSTALLATION DIMENSIONS 376mm Top view Front view 361mm LINE LINE IN LINE IN LINE IN LINE IN LINE OUT R10s POWER OUTPUT 120mm Back view Side view...
Ra10 SAFETY INSTRUCTIONS DO NOT OPEN THE COVER Do not open the cover to avoid the risk of electric shock caused by high voltage parts in the product. Warranty exclude damage caused by incorrect operation or installation of this product. DO NOT DAMAGE THE POWER CORD Please hold the plug when pull out or plug in the cord.
Ra10 LIMITED WARRANTY If manufacturing fault occurs during the specified warranty period from the date of original purchase, the product will be repaired or replaced without charge by Elder Audio. The Limited Warranty does not apply to: (a)exterior finish or appearance; (b)certain specific items described in the individual product data sheet or owner's manual;...