Beta Three R12a User Manual page 13

R6/R12a
Compact Active Line Array Sound Reinforcement System
Software Application Guide
If found device, shown as Figure 4:
Devices online are listed at left, the right part shows the information of the device chosen by user.
If user want to use the config file that opens from computer,Download Program Data to Device
must be chosen(the operation execute transmitting the parameters into Device's RAM, if no further
save into device operation, the parameters will be lost after the device power off ). If user chose
" Upload Program Data From Device, it will load the current program that stored in device to PC.
Select the left device that you will want to connect, click the
(! Attention please: If connect with several devices, each device must a ID number which is
exclusive in the system)
After connecting successfully, the software will update the display automatically, and show the
information of currently connected device, and current program used by device, see Figure 5:
On above interface, click corresponding function button, and executing those operation that you want.
12
Figure(4)
"
"
" Connect button to start connecting.
Figure(5)
SOFTWARE APPLICATION GUIDE
"
"