Beta Three R12a User Manual page 12

SOFTWARE APPLICATION GUIDE
Software Application Guide
1.4> Device: Modify the device information, and saved in the equipment automatically, only valid on
connection status;
1.5> Help: the control software version information.
2. Connecting the device.
2.1> Three hardware connection solution(USB,RS-232,RS-485) are available for your connecting;
2.2> After connected the device with computer port by connector, Click the "
"E nable Communications" command to start the connecting. See Figure 2:
The software will search the connected (hardware connection) device automatically,
Device... " will be shown at the bottom of interface's status bar, see Figure 3:
Compact Active Line Array Sound Reinforcement System
Communications
Figure(2)
Figure(3)
R6/R12a
", select
" Search
11