Table of Contents
Advertisement
R6/R12a
Compact Active Line Array Sound Reinforcement System
Software Application Guide
How to get the software
The software is stored in the CD with equipment packaging. The latest version also may be downloaded
from the company website.
Software installation
System requirement: Microsoft Windows 98/XP or above version. Display resolution should be 1024*768
or above. The computer must have a RS-232 port or USB port. Run the
(V2.0).msi
"
file, according computer's setup guide to install the control software.
Equipment connection
Connect the equipment to computer by RS-232, if the computer has not the RS-232 interface, you may
use USB port (after connection, the computer will indicate that new device is found, then you may install
the USB driver located in
Software operation guide
1. Run the software(Active Speaker Controller) from program menu in the windows start button, the
following interface will be shown, See Figure 1:
This interface includes all function modules about the equipment, menu description as following:
1.1> File: Open the configuration files, or Save current configuration as a file into computer;
1.2>Communications:
Connect
Communications") the equipment, Operation details refer to following description.
1.3> Program: Obtain the information of currently used configuration file (Disconnection status),or the
information of current program in the equipment(Connection status).
On disconnection status, only Display Current Program No,
"
Edit Current Program Name and Load Factory Default Configuration may be valid. All
changes do not affect the equipment internal program settings.
On connection status, all items are valid under the Program menu. If selecting the Edit Current
Program Name
"
command, the current program name auto saved in the equipment;
If selecting the
"
Load Factory Default Configuration command, the current program is overwrite
by the default setting automatically (! Attention Please: this operation will overwrite the current
program configuration, before executing this operation, please make sure you really ready to load
factory default settings). Details of other function items (such as"List Program & Recall" and " Save
as current program in device )under the Program menu, please refer to following description.
10
"
driver directory of the CD.
"
("Enable
Communications") or Disconnect ("Disable
"
"
"
"
"
"
SOFTWARE APPLICATION GUIDE
"
Active Speaker Controller
Figure(1)
""
Display Current Program Name ,
"
"
"
"
"
"
Advertisement
Table of Contents
