Konica Minolta AccurioPress C3080 User Manual page 19

2.2 Installation Procedures
4
Align the adjusting block assies (2 pieces) to C5, C6/C5,
and 6x9 1/2 on the indicating label, and install them.
% Align the mark on the adjusting block assy with the
mark on the indicating label.
5
Install the tip auxiliary guide/rear assy [C] (1 piece) and the
tip auxiliary guide/front assy [C] (1 piece) to the paper
guide side plate.
% Align the installation hole in the tip auxiliary guide assy
with the positioning pin.
% Align the cutout of the tip auxiliary guide assy with the
positioning collar.
6
Align the bottom auxiliary plate assy [D] with the mark line
on the bottom auxiliary guide assy [A]. Align the edge of the
PET sheet with the edge of the bottom auxiliary guide assy
[A]. Then, install them.
AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L
6x9 1/2 (152 x 241 mm)
C5 (162 x 229 mm)
C6/C5 (114 x 229 mm)
2
2-11