Internal Phone Book Entry Options - Sanyo SCP-4900 Operating Manual

Sprint dual band
Hide thumbs Also See for SCP-4900:
Table of Contents

Advertisement

Internal Phone Book Entry Options

When you display an Internal Phone Book list, highlight your desired entry and press
OK, then select the box under your desired label category and press Options (left
softkey).
Call to dial the phone number. (If you are roaming and have the Call Guard feature
l
activated, you are required to take an extra step to proceed. See "Setting an Alert
When Roam Charges Apply (Call Guard)" on pages 13-14.)
Call: Speaker On to dial the phone number with Speaker Phone mode.
l
Call Alarm to set the call alarm to the entry.
l
Set Speed Dial to set the speed dial to the entry.
l
Set Voice Dial to set the voice dial to the entry.
l
Prepend to alter a phone number by adding additional numbers.
l
Erase to erase the selected number.
l
To erase the whole entry under the name, highlight the entry in the Phone Book list
and press Options then highlight Erase Entry and press OK.
Visit Site to visit the Web site. (Only Web category)
l
Adding a Phone Number or Address to an Internal Phone Book Entry
To add a phone number or address to an entry:
1. From the Standby mode, press Menu to display the main menu.
2. Highlight Phone Book, and press OK.
3. Highlight Find Name, and press OK.
Press right of the Navigation key for the shortcut (steps 1 through 3).
l
4. Highlight the entry you wish to add phone numbers/e-mail/web addresses, and press
OK.
5. Select the box under your desired label category by scrolling, and press OK.
6. Enter the number or address, and press OK.
7. Press Save (left softkey).
If you enter the already stored number or address, you will be prompted to select Yes or
No to store again at step 6 above.
Note: Data or Fax can only be dialed through a personal computer.
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents