Turning Your Phone On And Off; Unlocking The Phone - Sanyo SCP-4900 Operating Manual

Soft Keys
You can select the menus, which are described at the bottom line of the display by
pressing the corresponding soft keys (left/right). In this User Manual, the explanation
for selecting such menus are as shown below:
Press MSG.
(Press the soft key corresponding to MSG.)

Turning your Phone ON and OFF

Turning your Phone ON:
To turn your phone on, press and hold END/.
Once your phone is ON, it displays "Looking for service..." indicating that your phone is
searching for a signal. When your phone finds a signal, it automatically enters Standby
mode – the phone's idle state. At this point, you are ready to begin making and receiving
calls. If your phone is unable to find a signal after 15 minutes of searching, a Power
Save feature is automatically activated. When a signal is found, your phone
automatically returns to Standby mode. In power save mode, your phone searches for a
signal periodically without your intervention. You can also initiate a search for Sprint
PCS service by pressing any key (when your phone is turned ON).
Tip: The Power Save feature helps to conserve your battery power when you are in an area where there
is no signal.
Turning the Phone Off:
Press END/ for one second until you see "Powering off" on the display. Your screen
remains blank while your phone is off.

Unlocking the Phone

1. Press and hold END/ to turn the phone on.
2. When "Locked" is shown on the display, press Unlock(left softkey).
3. Enter your four-digit lock code. For security purposes, the code is not visible as you
type.
9